Gasmate Classic 2 Burner Stove

G'day Kate,

An alternative hose cannot be used with this stove, the gas pressures are only compatible with a 1m long hose.
You can refer to your stoves manual for further infomation, but I've copied that section of the instructions here:
"Only use the hose assembly as supplied with this appliance for connection to the cylinder - DO NOT USE ADAPTORS.
Maximum hose length is 100cm"

G'day Tom,

No, the stove requires an unregulated gas supply so a regulator will prevent the stove from working.
If you want to use a POL bottle all you need is a 3/8th BSP to POL adapter to attach to the bottle.
The hose supplied is designed to attach to a normal LPG gas bottle, just with a different size fitting, there's no need to treat the attachment process any differently.

G'day Phil,

The hose that comes with this stove has a 3/8th BSP fitting.
Some LPG gas bottle come with this connection as standard, and some come with a POL fitting.
If your gas bottle has the latter you just need the this adapter.

G'day Jim,

No, the Classic 2 Burner Stove is designed to be used with a standard LPG bottle with a 3/8" BSP fitting. Theoretically you could use a Coleman Propane Cylinder be using this UNEF to 3/8" adapter, however it's not something we'd recommend.

G'day Rod,

The easiest option would be to get a gas bottle with a 3/8" BSP fitting, so that there is no need for any adaptors. We sell them in 1.25kg, 2kg, 3kg and 4kg. 

G'day M,

Yes, you'll need some matches or a lighter to get this Classic Stove alight.

G'day Jus,

We don't currently have the jets for the Classic 2 Burner Stove on our website, but we should be able to special order it for you from Gasmate. Please send us an email and our special orders team will be able to advise on the current price and availability.

G'day Lily,

You can use the UNEF to 3/8" BSP adapter in order to use this unit with 465g Propane Cylinders, however it is something we'd recommend using with caution, and ensuring you can secure the cylinder on a stable surface.

G'day Fiona,

Sorry about that, our codes system has changed a little since that question was answered! You'll need the Fine Thread High-Pressure Hose.

G'day Olivia,

The side wind guards are foldable, but unfortunately not removable.

G'day Kobi,

The Classic 2 Burner Stove has a 3/8" BSP fitting on the end of the hose, so any of the Gasmate Cylinders with that fitting will suit. Check our the 1.25kg 2kg, 3kg, 4kg cylinders.

G'day Kobi,

You can use the Classic 2 Burner with your standard BBQ gas bottle, you'll just need a POL to 3/8" BSP adapter to connect the hose to the bottle. 

G'day Tracy,

Yes you can use a 2kg bottle with the Classic 2 Burner Stove. Thje supplied hose is 64cm, but if you wanted a slightly longer hose then the Companion High-Pressure Fine Thread is 120cm long.

G'day William,

You will be able to run the Gasmate Classic 2 Burner Stove from the small propane canisters from Coleman. You'll need the Gasmate UNEF to 3/8 BSP Adapter to convert those bottles for use with this stove. The other option would be to look at the Companion Weekender 2 Burner Stove that is already set up to be used with the Coleman Propane canisters. 

G'day Jordan,

The hose for the Gasmate Classic 2 Burner Stove is 64cm.

G'day Tameika,

It's not recommended that you extend gas hoses.. Your best bet is to grab one of these Companion hoses and use one of these 3/8BSP to POL adapters. I've updated this information from our previous answer as the link was incorrect, apologies if this caused any confusion.

Ben

G'day Vicki,

You can use the Gasmate Classic 2 Burner Stove with a 4.5kg or 9kg swap and go bottle, you will just need an adapter that you can find here

G'day Annie,

While you're correct that swap'n'go bottles have a POL fitting, to connect the stove you need the Primus one I specified as the Gasmate one you've referenced is for the reverse of what Vicki asked for, you'd use the Gasmate adapter if you had a BBQ with a POL hose and wanted to use a smaller 3/8"BSP bottle.

You certainly will Kate. You'll need an internal valve adapter which turns the output into a 3/8BSP, which is the standard gas bottle fitting on most camp stoves. You can see them here. 

We don't have any in-stock right now, but if you were to order one with your stove we'd make sure we sorted one out for you as quickly as we could. 

Ben

G'day Alexandra,

I've just had a look at one of our Gasmate Classic 2 Burner Stoves on the shop floor and can confirm that you can fold the windshields out from the stove to allow for bigger pots to sit on the stove.

G'day Josh,

We'd recommend you use one of the Gasmate 3/8" BSP Camping Bottles we stock, like the 2kg version here - https://www.snowys.com.au/38-bsp-camping-gas-cylinder-2-kg. They're available in a bunch of different sizes and come with the correct fitting to pair up with the Gasmate Classic 2 Burner Stove. 

G'day Sarah, 

The correct hose that you'll need isn't online unfortunately, but we do have it in store so you pop in to visit us, or you can give us a call and we can take your order over the phone. It's called the Gasmate LP Gas Hose, and the Snowys code for it is 42391. 

G'day G,

The Gasemate Classic 2 Burner Stove is a high pressure unregulated stove.  It does not require a regulator.  Thanks for picking that up!  We'll get it amended.