Oztent RS−1 Series II Swag

G'day Mav,

Yes, the packed dimensions are true to size - check out our photo of Wes in the Snowys team holding this bag for a real-life gauge of size.
The mattress is removed from the RS-1 for pack-up anyway, so if you chose to keep that out of the bag you may reduce some of the bulk of the packed size, but the width and length will remain the same.
You don't absolutely have to use a mattress with a stretcher, but they can be valuable to add in a bit of insulation for cold nights.

G'day Jono,

There has never been condensation issues as such, more so that condensation is an unavoidable experience in certain weather conditions for any camping setup.  Single-skinned shelters such as swags and canvas touring tents are particularly vulnerable, and when the space is smaller as with a swag, it can be even more challenging.
Condensation occurs when the inside temperature is quite different from the outside temperature, so double-layered shelters create a gap of air between the outer and the inner which sits as a middle ground, reducing the issue.
In a swag, whilst it may seem counter intuative, the best way to combat condensation is ventilation by having all the windows open.
In the case of the RS-1, in particular bad 'condensation' weather this will also mean have the doors pinned open.

G'day Ash,

Not through use, but you may be able to grab one from Oztent directly.
Jump over to their contact page here.

G'day Rebecca,

There isn't anything off the shelf sorry, although that is a great idea!
Most commonly people with swags who want a bit more shelter will opt for something like the Oztrail Hiker Fly, & set up like a tarp shelter or awning over the top of their swag.
I'm not sure if that's the idea you're going for, but may be worth a look - here.

G'day Chen,

The RS-1 is a king single swag, designed for one person.  I personally would not share this swag with anyone, because i dont like to sleep cramped and move around alot in my sleep.
If you are not sure, I'd recommend looking at the sleeping area dimensions, and mark out a rectangle on the ground - masking tape inside or chalk of pavers outside works really well.
That will give you a real life tangible size of the space, and you can even lay down in the space with your child so see if its suitable.

G'day Chen,

The widest self-inflating mattress option we have that will fit is the Black Wolf Hexatherm XL Single 3d Diamond, which is 90cm wide.
Anything larger than that will be too wide for the the space, at 110/120cm

G'day Chen,

The RS-1 swag packs quite wide due to limitations with the frame.  It's not a good fit with the Pro Travel Bags.
If you are wanting a waterproof option for transport the easiest way it to wrap in up in a tarp with some straps if you are expecting rain.

G'day Sam,

Yes, the mattress in the RS-1 Swag is the same size as listed under the sleeping dimensions. It is a little thicker than the mattress in the video on the page, but it covers the entire internal area of the swag.

G'day Justin,

No, it's not.  If you want to pop it on your roof racks & you're expecting rain, it'd be ideal to wrap in in a tarp.

G'day MJ,

I'm not 100% clear on your question sorry, but RV tent flys are not compatible with RS swags, and vice versa.
Hope that gives you the info you need.

G'day Wayne,

If you're pairing the RS-1 Series II with a stretcher, then the included mattress should do the trick. If you want ultimate luxury, or plan to sleep directly on the ground you may want something a little thicker.

G'day Mal,

You shouldn't have any issues with condensation if you use the fly as a fly instead of an awning, and you open the rear base window and front top windows to increase ventilation and airflow.
Check out our Podcast episode Dealing with Condensation for more helpful info!

G'day John,

We now carry the Gen II model, Oztent upgraded the mattress and made a few minor changes to the specifications. The video on the product page is of the Gen I version.

G'day Shirley,

I've had a chat to Oztent and the poles extend to 1.7metres in length.

G'day Ash,

The RS-1 packs up as a rectangular type shape. The Darche Nero 240 Gear Bag is a cylindrical shape so unfortunately, this bag won't work for this swag.

G'day Ash,

The carry bag is fairly weatherproof, however, prolonged exposure to wet weather will likely leave your swag a little damp.

G'day Mat,

The RS-1 isn't able to be attached to any other awning / fly / sailtrack unfortunately.

G'day Rob, 

I've just had a squizz at the display model, and I couldn't find any hanging hooks for a lantern unfortunately. There is a gear pocket on one side that you could tuck a headlamp into for a bit of hands-free lighting though. 

G'day Donna,

The RS-1 Swag is a little too narrow for an ATM 1100 mattress, and due to the density of the foam, we don't think it will easily mould into the size of the RS-1. We'd probably recommend going for a 90cm wide self-inflating mat, or getting some custom foam cut somewhere like Clarke Rubber.

G'day Rachelle,

The RS-1 Swag sounds like a good contender. The flexibility of the front mini awning/fly might help provide a bit of extra space for the dogs. 

G'day Steve,

There is a fair amount of in the RS-1 Swag. There are ventilation windows at the rear and in the top of the door. Or you can also open up the front doors and roll back the canvas for extra ventilation. 

G'day James,

The RS-1 Swag is a tiny bit wider and longer than the XL100 stretcher, so while it is possible, it's not an exact fit. Good news though, Oztent do make the RS-1S Stretcher that is a perfect fit, and has some handy attachment points for the RS-1 Swag itself.

G'day Simmon,

It will be alittle on the big side but I reckon the RV1 Mesh Floor Saver would be a great option, otherwise, the 8 x 8 Oztrail Ultramash Tarp would also do the trick!

G'day Stephen,

At this point in time, we're not aware of any changes planned for the RS-1 Swag. There are windows for ventilation in the top of the front doors, the rear windows, and the front awning flips back to act as a flysheet, so there is a fair bit of ventilation in the RS-1 Swag as it is.

G'day Damien,

The Darche ATM 1100 is a tiny bit wider than the RS-1 Swag itself, but there will be just enough flexibility in the bucket floor to fit the mat. Most of our other mats are only about 80cm wide, so probably won't be quite wide enough, so this will likely be the best option.

G'day Karl,

You won't easily fit yourself and a stretcher in an RS-1. It's really just designed as a swag.

G'day Sue,

The Oztent RS-1 uses a fabric Oztent call ModCan which is a 210D Ripstop Polyester. It differs from the canvas many manufacturers use in that it relies on a polyurethane coating on the inside of the fabric for waterproofing. So in the long, long term, the waterproof coating may not stay as waterproof as canvas but the upside is, it's a much lighter material making transporting and pitching easier. Generally, a synthetic material like this will be adequate for the vast majority of uses but those looking at extended, continuous use such as a big trip around the whole country might find canvas is a more durable option. Both materials should be adequately waterproof but stability is probably more influenced by the frame design and the ability to guy the tent or swag out. 

G'day Ash,

Given that the mattress is only 25mm thick, the verdict amongst the staff here is if you want a really good nights sleep it's probably worth looking at an aftermarket sleeping mat to go in the RS-1. But if you were just after some basic comfort it'll do the trick. 

**Update** the mattress has now increased to 4cm in thickness which will provide more comfort than the previous 2.5cm, but we still suggest that if you were wanting a really good nights sleep, then a self-inflating mattress is the way to go!

G'day Andrew,

You shouldn't have too many issues at all using the Oztent RS-1 Swag on top of a stretcher like the Sundowner Titan. Just be wary of making sure that you rope your swag out well. 

G'day Andrew,

We've just gone back to the drawing board to check this out and from trying it in the shop it might not be ideal as there could be a risk of the framework bending with the sag in the stretcher material.

G'day Brook,

To be totally honest with you, we're not too sure about the quality of the mattress in the Oztent RS-1 Swag yet, we're yet to have our first delivery come in. It might be worth noting though that the mattress is removable, so you can always swap it out if you'd like. We're looking at doing a review of them when they come into stock though!

G'day Karl,

While a groundsheet isn't required, they are always beneficial to protect against moisture and damage.

Yes - the Exped Megamat 10LXW will fit with no worries.

G'day Steven,

That's the only downside that we have identified so far with the Oztent RS-1 in that sleeping gear will need to be removed before packing it down.