Supa Peg Big Foot T−Nut Steel Tent Poles

G'day Richard,

I didn't measure the base of the Big Foot Pole, sorry, but I did try them out with the pole plate and they fit nicely with some room to spare.

G'day Steve,

The advice from the experts here is to grind down the spigot to make it fit if you've got your heart set on the Supa-Peg poles, or the other option would be to remove the eyelets you want to pop the poles through and upgrade them to a larger size using the Eyelet & Tool Set.

G'day Terry,

Most of the Supapeg poles are made here in Australia, however unfortunately not the Big Foot T-Nut Steel Poles.

G'day Shane,

The T-nut is part of the bottom pole, the bottom pole has a wider diameter, and the narrower top pole slots inside of it. 

G'day Sarah,

Unfortunately, I don't have a Bedarra Tent on hand to test out for sure, however, I can tell you the diameter of the spigot on the Supa Peg Big Foot T-Nut Steel Tent Pole is 8mm, which is a fairly standard size.
You should be able to measure the eyelet diameter on your Bedarra Tent to see if they'll fit.
Hope that helps!

G'day Jamo,

I've had a chat with a colleague who is an expert with the Coleman Instant Up tents, unfortunately, the spigots are too large to fit through the eyelets. Good news though, the Oztent Alloy Pole will fit the eyelets on the Coleman Northstar tent. 

G'day Dean,

I've just double checked and the Big Foot T-Nut Steel Tent Poles work with the Black Wolf Turbo Tents. 

G'day Jason,

I've just tried the Big Foor T-Nut Pole with a Coleman Instant Up and unfortunately, the spigots are too large to fit through the eyelets. Good news though, the Oztent Alloy Pole will fit the eyelets on the Instant Up tents.

G'day Mark,

The Supa Peg Big Foot T-nut poles have a minimum length of 130/156/170cm and are adjustable to a maximum length of 230/275/305cm for the three different sizes. 

G'day Belinda,

Yes, the Supa Peg Big Foot T-Nut Steel Tent Poles will work well with the Oztrail Hiker Fly.

G'day Zoe,

Yes, the Supa Peg Bigfoot T-Nut Steel Tent Poles have a standard size spigot that will fit the eyelets on the Oztent RV awnings.

*UPDATE 2024*

The Eyelets on the Oztent RV Range now support up to an 8mm spigot and these poles have been tested and will fit.