G'day Sue,

Yes, you can use these on a lower BTU stove like a Butane cartridge option.  Check out the 3rd product picture we have online, of the base of the pot.  You can see a ring around the metal base which says "no flames past this point" - as long as you keep the burner flame low enough to stay within that marker, you should be fine.

G'day Arun,

Yes, these can be used on the 360 degrees Furno stove. This is one of the most popular combinations we sell!

G'day Lyndal,

We've had these questions before on other products in the X range, so I'll add that for you here:
By glass cooktop, I'm assuming you mean an electric one as opposed to induction?
I can't see any reason why you couldn't, but you would need to adhere to the maximum flame/heat distribution ring printed on the base of the kettle.  This is there to ensure the silicone sides of the kettle avoid as much direct heat as possible, so will mean you'd have to use the smallest 'burner' option.
As the base is 5052 aluminium, it isn't magnetic, and therefore can't be used on an induction cooktop.

G'day Darryl,

We wouldn't recommend using the X Pot on the Eventemp Stove. They've really been designed to use with smaller hike style burners, that throw a smaller flame. The Eventemp flame spreads a little too far and can damage the silicone sides of the X Pot

G'day Julie,

The X Pot 2.8L is designed for use on a compact hiking style gas stove, so, unfortunately, we wouldn't recommend using the pot in your caravan oven.

G'day Hayden,

We've had a good look at the X Pot 2.8L on the HyperFlame FyreKnight Stove and unfortunately, we don't think it will work. The silicone on the X Pots can't come in to contact with direct flame, and unfortunately, the diameter of the pot and the stove are the same, so we wouldn't want to risk the flame damaging the pot.