BlackWolf Turbo Lite 450 Extenda Awning

G'day Rachel,

I've just had a look at our display model and the extenda awning attaches using a velcro strip on the front of the tent awning, this is the same velcro strip as the front wall would normally use. You can attach the awning extenda, and then attach the front wall to the extenda awning. If you wanted to enclose the whole front of the awning and extenda awning then you can purchase two side panels for each side and a Turbo Side Panel Joiner.

Sure does, Richard, it comes with everything you need to create a weatherproof extension to your existing awning. 

I've checked this with our purchasing team Phillip, at the moment they are not aware of an Extenda Awning being available for the Turbo 380 sorry. They did indicate that there any be some new products later in the year, fingers crossed this will be part of that.

G'day Tim,

The ridgepole is only reinforced at the attachment points on the Black Wolf Turbo Lite 450 Extenda Awning.

The front panel can be attached to either the front of the Tent awning or the front of the Extenda awning.

Hi Vanessa, I have just confirmed this with Black Wolf as it seems I have previously had some contradicting advice. The response, directly from the designer of the Turbo range this time, is that the Screen Rooms can only be fitted under the tent awning and not the Extenda Awning. This is due top the awning of the tent being trapezoid in shape, whereas the Extenda Awning is square.

Hi Candice, these come in a bag, and when packed measure approximately 120 cm in length with a diameter of about 10 cm. This is dependent on how tightly you roll it up.