23Zero Side Pull Out Awning 2.5 x 2.5m

G'day Bill,

We know the bracket attachment to the backing plate is cast alloy and the mounting brackets that come with the kit are coated steel but 23Zero haven't specified if that's stainless steel or standard steel.  Given that, we can't be 100% sure that it's stainless, sorry mate.

G'day Steve,

The Side Pull Out Awning 2.5m x 2.5m is supplied with 2 L-brackets, 4 x 20mm M8 nuts/bolts and 4 x 20mm M6 nuts/bolts, so this will suit most roof rack systems with a channel in the top.

G'day Chris,

The support poles for the Side Pull Out Awning are about 2m in length so will suit most vehicles, but might be a little short for a sprinter van sorry.

G'day Jamie,

At this stage there is no awning tent available for the 23Zero awnings, and as far as we know their isnt one coming.  I reckon your best bet would be to contact 23Zero directly HERE, and register you interest in that type of product!

G'day Jamie,

Just a follow up on this one for you!
23 Zero have recently released the Ramblers Den Extension Tent 2.5 for their 2.5 x 2.5 Awning.

G'day Brian,

The Side Pull Out Awning 2.5 x 2.5m doesn't have a spike bottom on the awning poles. The cross poles do slot into a hole when fully expended. You can see the second image which shows where this pole slots in.

G'day Luke,

At this stage, there are no walls available for thee 23Zero Side Pull Out Awning 2.5 x 2.5m but there are walls in the planning phase that should be available in October.