If your roof top tent could use some further shelter and privacy, the Hi-View 2200 3-way Annex room Darche is ideal.
This annex is designed for camper trailer or lower vehicle setups and is constructed from 210 ripstop polyester for durability, with a zip-off 550gsm PVC bucket floor. You can use it to stash away your extra gear or as additional sleeping space. Access this annex from the single entry which has superfine insect mesh and a privacy door. In warmer conditions, you can get ventilation through the two large side windows with storm covers, and there is another rear opening for vehicle access.
Add the Hi-View 2200 Annex from Darche to your set up for extra liveability to your RTT.
1.8m drop is ideal for camper trailers, 4WD utes and SUV's
2.1m drop is ideal for higher camper trailers, lifted 4WD utes and larger 4WD wagons
Front entry
2 side windows for ventilation
Superfine insect mesh
Rear opening for vehicle access
210D oxford polyester ripstop material
Storage bag included
550gsm PVC zip off bucket floor
External Dimensions:
250L x 280W cm
Weight:
10.3 Kg
Max. Head Height:
180 cm
Material:
210D Oxford Polyester Ripstop
Floor Material:
550gsm PVC Zip off Bucket Floor
Waterhead Rating:
Not Specified by Darche
Warranty:
3 Year
Supplier Code:
T050801630
Snowys Code:
33465
Reviews
(0)
Q&A's (3)
area of floor between back and ladder. 1 answer
Hello, I am interested in fitting a Queen mattress inside this annex and have some concerns about size. The mattress measures 198 x 152 x 45H cm. Will it fit behind the ladders or will it impede the support and ladder position? Thanks
Themos - Noosaville(1 year ago)
I don't have an annex setup I can use to check this for you sorry, Themos, but I can make some reasonable assumptions based on dimensions and the video we have on the features of the Hi-View 2200 tent. If you look in that video at about 1:53 (see here - https://youtu.be/aiqXD1js7IQ?t=115), it looks like there is about half a metre between the ladder and the edge of the annex, so we can estimate that there is approximately 2 metres from the ladder to the back wall of the annex, which should be enough for a queen bed even when taking into account the sloping ladder, although not a heap of space.
This is all dependent on where the tent is mounted on your car though, that is, if the tent isn’t mounted right to the edge of the vehicle, then you'll need to account for the amount of space that the side of the vehicle will impede on the total depth.
Long story short, it's possible, but there are a few 'it depends' attached to your question, and even if it does fir it won; t leave you a heap of space.
Hope that helps.
Ben - Snowys(1 year ago)
Annex room1 answer
Can the annex room be left on the tent for pack up if the tent had nothing but mattress' in there
Guy - Bundaberg, QLD(3 years ago)
G'day Guy,
No, unfortunately, you won't be able to pack the annexe away with the tent, you'll need to detach it and pack it away separately.
Leece - Snowys(3 years ago)
Condesation and leaky floor1 answer
We have had some trouble with our 1.6 annexe. It has terribly leaked across all zip seams and created a river inside the annexe floor. there was also water running down the inside front walls from the seam, this had the flap cover over the zip but it still happened. Does Darche have any advice on this?
Janelle - Officer, VIC(4 years ago)
G'day Janelle,
Sorry to hear you're having trouble with your Hi-View 2200 Annex. We'd suggest touching base with Darche via their warranty form to see how they can help you out.
