Trangia Gas Burner Accessory

G'day Lexi,

We've not really had any feedback about the noise level on the Trangia Gas Burner. At this point in time we don't have an active display model to try this out, however in general this style of burner should be overly loud, and should sit around the same noise level as the jetboil.

G'day Margot,

Yes, you can use Jetboil canisters with the Trangia Gas Burner Accessory. You can use any canister with the screw thread Lindal valve. The Jetboil and MSR Canisters tend to be the more efficient options due to the ratio of butane/isobutane to propane.

G'day Brendan,

No, you cannot run a Trangia from Butane cartridges.
The Gas Burner option is compatible with Isobutane/Propane hiking gas canisters with a Lindal valve. They're available in almost any camping and outdoor shop, are super lightweight and alot more efficient and reliable compared to the ones you are talking about.

G'day Sam,

Yes, you can, it will fit inside the unit in the same way the spirit burner normally would. You'd likely need to carry the gas canister itself separately though, depending on which bottle you go for. 

G'day Tania,

The Trangia Gas Burner attaches to a standard hike style butane gas canister with a Lindal valve. There are a few different brands available however as long as they're the style with a screw-in thread then you'll be fine.

G'day Francis,

The Trangia Gas Burner is explicitly designed for use with the Trangia units, so there wouldn't be a way to ensure the unit is safe and stable inside a Firebox, so it's not something we'd suggest.

G'day Bill,

Yes, it is a requirement that all Gas products have the AgA approval. I can confirm that the Trangia Gas Burners we sell have the appropriate tags attached.

G'day Robert,

I'm not entirely sure I understand your question, as I have no idea what a Mortein style canister is (other than the bug spray?). The gas conversion kit is designed to attach to screw style butane/isobutane canisters that are the same as the furno stove you reference. The current image work in the current design with a flat disc style attachment and a gold flame adjuster. The previous reference to black handle was on the older version that had a slightly different design.

G'day Chris,

Yes the Trangia Gas Burner has simmer control, the small black handle on the top in the flow adjuster. They attach to the top of a standard hiking style butane gas bottle.

G'day Peter,

I've never had a problem using non-stick pots and pans on my gas burner, just make sure you use utensils that won't damage the non-stick finish and you should be fine. 

G'day Paul

It will work with any of the standard screw type isobutane/propane canisters, such as the ones from Jetboil, MSR or Kovea. We don't have them listed online as we are unable to ship them.