G'day Wayne,

There are some rubber end caps and small washers that need to be refitted after installing the awning to your roof rack system.
If these are not replaced, water can get into the channels of the backing plate, and run through the bolt holes.
This is the only thing we've heard of that relates to ingress issues with the bag.

G'day Sophia,

This awning is shipped in two boxes, with the bracket and fixings kit being in the second box.
Check your tracking information which will list a partial or split delivery, and show the progress for the delivery of the second box.

G'day Adam,

It is compatible, yep! As with any of the wall sets, you'll need to set up the awning legs though due to the additional weight on the frame.

G'day Karen,

Yes, the Eclipse 270 Freestanding LED Awning comes with mounting brackets.

G'day Helen,

Yes, the existing walls (both Gen 1 & 2) are compatible with the new Freestanding LED Awnings.

G'day Alan,

There's 3 different distance possibilities as there are 4 mounting channels on the back for flexibility.
These channels arent evenly spaced - they're in sets of two closer to the top and bottom edges.

Ive taken the measurements of the 3 possible bracket possitions, centre to centre on a standard yellow stanley 8mm tape measure.
Hopefully one of them will work for you!

Outer channels - 145mm
An outter and inner channel - 103mm
Inner channels - 62mm 

G'day Barney,

Just to confirm, are you talking about the channels on the backing plate of the awning itself?
The t-channel bolts are designed to go into the channels on your roof rack system to anchor the bolts down, so just want to make sure we're getting the right answer for you.

G'day Michael,

This awning can be mounted on cross bars, but it isn't suitable for your set up sorry - I've also got an Amarok & canopy.

It's also not advised to mount the awning partially on the cab, and partially on the canopy, as these sections move independently of one another, causing torsion and flexing which puts stress on the backing plate & mounting hardware.
Any damage that occurs due to mounting across the canopy & cab is not covered by warranty.

If you are able to transfer that 3rd rail so all three are fixed to the cab roof, and you can mount the awning with no more than 60cm of unsecured length on either end, then you'll be grand.

G'day Russell,

It may potentially come in a Drivers Side or RHS option in the future, but Darche only range a left side or passenger version at this stage.

G'day Dan,

Yes, all the Eclipse Gen 2 Awning Walls are compatible with the new freestanding model.