Darche Eclipse 180 Awning Wall Set

G'day Ryan,

Darche have indicated that the Gen 2 wall sets for the 180 and 270 awnings are compatible with their new Freestanding Awning models.
The only consideration is that the added weight of the walls hanging off the awning will require you to use the poles.

G'day Peter, 

The Awning attaches via the zips under the awning to the zips on the awning walls, not velcro for this one.

G'day Karen,

We haven't seen any singular walls for the 180 Eclipse yet sorry, just the whole wall set is what's currently available. 

G'day Sandra,

Based on the situation you have described, and long as you are fully pegging the walls, you shouldn't need to peg the awning guy rops down as well.  I would encourage you to use your own common sense and judgment though, and if the wind is really kicking off and you can see your awning is struggling, chuck a few more guy ropes in the ground.

G'day Ellie,

It's possible that this will fit, but we don't actually know how large the kitchen of a Jayco JPod Outback is. The awning extends out perpendicular to your vehicle 2m, and the square edge parallel with the vehicle is about 2m. The full length of the awning at the vehicle side is 6m, so hopefully this will help you work out whether it will cover your kitchen.

G'day Jacinta,

It's hard to give a definite answer, however I can give you some informtion that should help, you'll just need to measure the distance between your roof racks. The 180 Awning mounting plate is 220cm, and Darche indicate that the unsecured length of each side of the awning or the distance between the ends of the awning and the supplied brackets should not be greater than 600mm. Distances greater than these may cause excessive vibration through the awning resulting in the potential failure of fixings. Based on this you'll need an absolute minimum of 100cm between your roof racks.

G'day Rachel,

Unfortunately not no, the 180 awning wall set only covers the 3 main faces of the awning. The front side will generally come fairly close to meeting the vehicle, and the rear side has been left open for easy accessibility into the awning and the rear of the vehicle.

G'day Kevin,

Yep!  The Darche Eclipse 180 Awning Wall Set is compatible with both generations of the the Eclipse 180 Awning

G'day Kelly,

Unfortunately not.  The Eclipse 180 Wall kit is only available as a single panel to cover all 3 sides. None of Darches other wall options, or the 270 wall kits are compatible either as the zip coupling set up is quite different.  Sorry to not have the answer you were hoping for!

G'day Benita,

The Eclipse 180 Awning Wall Set won't attach to you 270 awning sorry. The wall set for the 180 is one continuous panel to fit across the three sides, whereas the 270 awning has three separate wall pieces, one that does the equivalent of the first two sides of the Eclipse 180. So, unfortunately, the zippers won't be compatible to work in the way you're hoping. 

G'day Tim, 

You won't have enough spare space in the Ecplise 180 Awning Bag to store the Awning Wall Set so you'll have to keep them somewhere separately in the car.