Ideal for securing your tarp down, or for pitching your hiking tent – you can rely on the 175mm Tarp Peg from Supa Peg.
This peg is made from 100% polycarbonate and is UV treated to ensure it holds up to the elements. This design has high impact head and cutting edges to make it easier to drive into the ground. It’s also made right here in Australia.
Perfect for use on soft soil or sand, pitch your hiking tent or tarp with ease with a couple of 175mm Tarp Pegs from Supa Peg.
Made from 100% polycarbonate
Ideal for use on soft soil or sand
Peg down tarps or pitch hiking tents
Large high impact head
Made in Australia
17.5L x 1W x 1D cm
17.5L x 1W x 1D cm
Is there a tool to remove these polycarbonate tarp pegs? How hard are they to remove?
Phil - South Penrith, NSW (9 months ago)
Generally these are suitable for soft, non compact ground like sand or turf, so you shouldnt have too many issues getting them out. The head on them is enough to get a grip by hand, and if they're not pulling out super easy first go, giving it a bit of a twist should get them out, no worries
Lauren - Snowys(8 months ago)
Why these instead of a regular galvanised key head peg?1 answer
For securing a ground sheet. Is there some benefit to using tyewe, or just reduced weight at the expense of strength in tough ground?
Tai - Mullumbimby(4 years ago)
The Polycarbonate Tarp Pegs are a lightweight option geared toward hikers who are after a lightweight peg to peg out their hiking fly or tent. If you're not planning to hike with them then the galvanised key head peg should be fine for you.
Leece - Snowys(4 years ago)
Dimension query1 answer
Will the spike fit through a tarp eyelet hole of 15mm diameter and is the head larger than this dimension so it won't go through the hole?
Mo - 3155(5 years ago)
Sorry for our slightly confusing dimension on these Supa Peg Polycarbonate Tarp Pegs. The peg itself is 10mm wide but the head is 20mm wide. So it should fit nicely through your tarp eyelets and then hold it in place pretty well.