You never want to use your Big Pig indoors - but beneath a pergola area or sheltered open space where your Big Pig sets the stage, the Big Pig Offset Chimney from OzPig is just what you need to help direct smoke away from the roof space and out into the open air.
An easy assembly of 3 pieces, this chimney is engineered from quality steel and allows you to offset the flue outside by 400mm. Add the pieces to your existing Big Pig chimney - either by placing the offset chimney high up onto the existing chimney, or at the base on the stove. All you need to do is make sure you're lining up the notches so the locking tabs fit into each other for safe attachment. It’s also recommended to use a tent pole for securing the offset chimney to the ground - just insert the spigot of your tent pole into the specially designed input on the upper elbow section of your offset chimney, and you’re good to go!
Add even more versatility to your outdoor setup, and position your Big Pig where you want it with the Ozpig Big Pig Offset Chimney.
Offset chimney by 400mm
Choice of configuration
Tent pole recommended for additional support
Compatitble with the Ozpig Big Pig
Straight 46L x 7.5/8W x 7.5/8H cm | 2 x Bent 25L x 8W x 12H cm
48L x 24W x 9H cm
Powder Coated Steel
chimney width1 answer
HI, WHAT IS THE FLUE DIAMETER PLEASE?
Steve - Freshwater, NSW(7 months ago)
The flue is 7.5cm in diameter, out to 8cm on the flange end. Hope that helps!