You’ll never have to take a punt at the condition of your battery again, with the Remote Battery Monitor with High Precision 100V/500A Shunt from Hard Korr.
This remote battery monitor, otherwise known as a coulometer, is a handy device that uses a shunt to acquire accurate readings of live current draw, charge level, and readings of battery voltage. Featuring a memory funciton too, it’s suitable for use with lithium, calcium, AGM, gel, and wet batteries.
The Remote Battery Monitor with High Precision 100V/500A Shunt from Hard Korr is the essential bit of battery kit for monitoring your set up!
Accurate readings of the battery voltage, live current draw and charge level
Suitable for common battery types including AGM, wet, gel, calcium and lithium
Memory function
Includes: LCD display module, 100V/500A shunt, 1 x shielded cable, 1 x mounting bracket
Working voltage 8-100V DC
Max. current 500A peak / 350A continuous
Operating temperature -10°C to 65°C
Certifications CE, RoHS, C-Tick
In Use Dimensions:
5.9L x 5.9W x 3.7H cm (Display) | 8.5L x 4.2W x 4.1H cm (Monitor)
Packed Dimensions:
14L x 5W x 18H cm
Weight:
0.41 Kg
Cable Length:
200 cm
Power Consumption:
Working current draw 10−12mA | Backlight current draw 100mA | Standby current draw 0.5−0.6mA
Temperature rating of the shunt for under the bonnet mounting?
Jim - East Fremantle, WA(10 months ago)
G'day Jim,
I have called Hard Korr to confirm and this isn't recommended for mounting under the bonnet as it's not waterproof. The operating temperature range is -20°C to 50°C, they advised you can get away with using this if it is in a sealed box but otherwise you may damage the device.
Kaya - Snowys(10 months ago)
Monitor1 answer
How is the monitor mounted
Sev - Annandale, QLD (2 years ago)
There is a bracket included, Sev, and directions in the user manual. Basically you need to drill a 54.5mm hole, slip the monitor through then secure the backet on the back.
Ben - Snowys(2 years ago)
Connection1 answer
How would this be wired up with a Hardkorr battery in a Hardkorr battery box.
Adrian - Joyner, QLD (2 years ago)
G'day Adrian,
If you jump back onto the product page on the Snowys website, you'll find below the specifications section and above the product reviews, a PDF file with full installation and operation instructions. This should provide you with all the info you need for installation, and what resources you'll need if not supplied.
Lauren - Snowys(2 years ago)
Shielded cable1 answer
Could you possibly tell me how long the supplied shielded cable is please? Need to see if it will reach the rear of my car
Chris - NSW(2 years ago)
G'day Chris,
We've just measured the cable and its 2m in total. The little terminal clips of either end are about 13mm deep, so the physical cable length is more like 197.5m. Hope that helps!
Lauren - Snowys(2 years ago)
Weatherproof rating.1 answer
Does this product have any IP Rating? I intend on mounting it in the tub of my ute, under a soft tonneau, and need to know if it has any IP Rating? Thanks.
Alex - Sydney, NSW(3 years ago)
G'day Alex,
Just jumped off the phone with Hard Korr on this one, and they've said that theres no IP rating on the remote battery monitor. It needs to be installed out of the weather, where it cant gets rained on. Perhaps you can install it on the front wall behind the cab, and get a little mini cap over it, like some outdoor powerpoints? I'm pretty sure there are things like this available through Jaycar.