G'day Andrew,

We don't currently have a Darche Dusk to Dawn 900 display to measure the exact length, however we've measured the sections of the composite swag pole set, and each of the three sections is 74cm, for a total pole length of around 210cm (once you account for the metal ferrule. 

G'day Mike,

The 900 is too short, go the 1100 and trim the segments down a touch - you'll be laughing!

G'day Fahd,

Couldnt tell you, sorry - we no longer sell Burke & Wills swags, so dont have the poles here to compare.
The Redgum XL is an 1100 wide swag, so I'd be inclined to go with that size, although the foot end pole is significantly smaller and will require being cut down to size.

G'day David,

The Bandit Swag 1400 will need slightly different poles that have a bend at the top. It would be best to get exact replacement poles through 23 Zero on their Spare Parts page.

G'day Bob,

Darche has revamped its swag poles, which are now composite material as a standard.
If you are replacing older aluminum poles, these will not only be compatible, but they're also an upgrade.

Thanks for the info Adam!

G'day Grayzee,

The 1400 size doesn't refer to the length of the poles, it refers to the width of the swag that these poles are intended to be used with.
The full length of each of these poles when joined together is 248cm.

If this is not long enough for your swag, there's no way to lengthen them as far as I'm aware.

G'day James,

As they're a basic pole set they may work on other swags, we just haven't tested them out.
The main consideration would be the length when compared to your original poles.  These can be trimmed down to size though, so you'd be able to make it work.