Add some extra stability and stop that sagging tarp from impeding on your living space by adding the C-Clip T-Nut Spreader Pole from Supa Peg to your shelter.
This pole is made from hi-tensile steel and is galvanised which will help keep it in good condition when exposed to the weather. Each end is Fitted with a Nylon C-Clip that will connect directly to round tube 19mm, 22mm or 25mm in diameter.
A Supa Peg C-Clip T-Nut Spreader Pole combined with a couple of upright awning poles will add a plethora of setup options to your custom camp shelter.
What is the minimum length of the 305 spreader bar please?
Sandy - Mclaren Vale, SA(11 months ago)
The minimum length of the 305 ins around 230cm. Hope that helps.
Lauren - Snowys(11 months ago)
I need a spreader pole which will clip between two poles about 110-125 apart. Will this pole retract to this length?1 answer
Also, what is the diameter of the poles? And if the ends get broken, can they be replaced?
Di - Hawthorn East, VIC(3 years ago)
The shortest of the C CLip T-Nut Spreader Pole should be short enough to suit your 110-125cm requirement. The poles have a diameter of 19 and 22.2mm. The ends can be replaced with these C-Clip Spreader Bar Inserts.
Leece - Snowys(3 years ago)
What is the minimal length please1 answer
I need them to be roughly just over a metre
Lisa - Caroline Springs (4 years ago)
The minimum length of the 183cm pole is 103cm which then extends out to 183cm. Based on your information, this should work well!
Susie - Snowys(4 years ago)
Can you use it to hold up Centre of an awning? 1 answer
Dylan - MAYLANDS(4 years ago)
The C Clips are designed to clip horizontally onto the perimeter poles of your shelter, so will work well to hold up the centre.
Susie - Snowys(4 years ago)
Can I replace the C clip on one end with another type?1 answer
I want to connect a horizontal pole (across the top of my tent) to a vertical pole (center of tarp) to create a solid pitched awning. It looks like these C clips are permanently crimped into the pole. Or are they removable? Could I replace one end only with https://www.snowys.com.au/nylon-tent-pole-inserts ? And if so, which size would I need? Round steel 19mm, 22.2mm, or 25.4mm?
Tai - 2482(4 years ago)
The end C-clip pieces are able to be removed from the steel tube so theoretically you could replace one end with the Nylon Insert. The two ends of the Spreader pole are different sizes, (22mm and 25mm) so you could for either size (22.2mm or 25.4mm) depending on which end you'd like to replace.
Leece - Snowys(4 years ago)
Clip size 1 answer
What size pole do these clip into ...are they universal for different poles ?
Dudley - Renown park(5 years ago)
Thanks for your enquiry. As listed in the Details and Specs, the Supa Peg C Clip T-Nut Spreader Pole clip will connect directly to a round tube 19mm, 22mm or 25mm in diameter.