Thanks to the Hard Korr 3 Strip Tri-colour LED Awning Kit, attaching permanent 12V lighting to your vehicle awning will simplify your setup and save time
Designed to illuminate the area under all common 180° or 270° awnings, you can leave these lighting strips attached to the folding awning bars when stored. The length of the included cables has been optimised to reduce excess and the 12V 1.5 metre power lead gives you the option to plug the lights into any 12V plug on your vehicle.
The light strips combine to pump out an impressive 3300 lumens to easily light any awning area while heavy duty insulated cables prevent voltage drop – resulting in brighter bars and less power draw. You could leave these lights on all night with complete confidence that they won’t discharge your deep cycle battery. Change your light levels and beat the bugs with Hard Korr’s exclusive tri-colour dimmer switch (included). Light up the night in bright white, relax with warm white, or keep the bugs at bay with the orange light setting. Control the brightness with a smooth and incremental dimming function to set the light level just the way you like it.
Made tough, like all Hard Korr products, the trimmable strips feature genuine OSRAM® LED chips, a high grade UV resistant silicone outer, and tough 3M double sided mounting tape. Weather the storm with an IP68 waterproof rating and waterproofed locking DC connectors on all DC cables.
We all like to get our camp setup time down to as little as possible, right? Start saving time this weekend and stick a set of these beauties up on your awning. The Hard Korr 3 Strip Tri-Colour LED Awning Light Kit is your perfect permanent awning partner.
Most Recent
Most Answers
Least Answers
Most Helpful
Can you provide better photos of how you would attach to awning? Could you wire it straight into the caravan light switch?
G'day John,
The LED light strips have adhesive on the back, so you just peel the backing off and stick it wherever you like on your awning - preferably the extrusions.
You can hardwire the lights, but only on the black cigarette plug cable.
Hope that helps!
Is each strip have all 3 colors or is one strip white, one strip white and the other warm white? Im hoping to connect all 3 strips together.Can i cut wires at each end and join ve and -ve to link around neat and tidy around my canopy as permanent mount and hard wire into a switch. Can I do this. Just trying to avoid the cluster of messy connectors unless they can be cut and customized lengths?
G'day Ben,
Each strip contains a series of lights, that when turned on in combination give the different colours. So you can run all three strips in white, or all 3 in warm white, or all three in orange. They can be trimmed to length, but are not designed to be cut at each end.
Will these fit inside my fiamma caravan awning when its packed away?
G'day Chris,
They should fit into most awnings, but the Fiama are renowned to be very tight when rolled up.
We don't recommend packing them away with these awnings, they're best to pack seperately.
Hi are these strips able to be cut to length? Thanks
G'day Andrew,
They sure are! At short intervals along the light strip, you will see a small line with a scissors symbol.
This is your cut point, and you can literally just use scissors - even the basic kind.
Hope that helps!
Hi, would this set up allow the lights to be operated individually or would all three be on at the same time?
G'day Julia,
This kit comes with 1 dimmer switch, which means there is a single control point for all three light strips which means they are all controlled at the same time. If you want to set up 2 different strands eg, 1 x light strip, 2 x light strip, you'll need an extra dimmer switch which you can find in the You Might Also Like section. If you wanted to control each of the 3 light strips independently, you'll need 2 extra dimmer switches.
Hope that helps!
Whether you're buying bulk for yourself, or through work, submit a quote request below and we'll work with our suppliers to offer our best price.