Voyager Portable BBQ

G'day Ross,

Good news, the Voyager BBQ comes with a hose that has an inline 2.75kPa regulator, so if you're wanting to run it off your motor home then you'll just need to use a gas hose with 3/8" SAE to bayonet fittings. 

G'day Hamish,

It's best not to put stoves or Bbq's on plastic for obvious reasons! A metal surface will be a much safer option you could look at a table like the Oztrail Slat table or a Zempire Slatpac or the Outdoor Connection Fortis table.

G'day Chris,

I've checked our display model and it does fit in the Medium Canvas Duffle Bag, it's tight but not too much of a struggle. If you were wanting to fit extra bit and pieces in, then the Large bag would give you plenty of room

G'day Alexandra,

The hose length is 110cm including the regulator.  In theory you should be able to connect this to you LPG set up at home, however you'll need to make sure you have the right fittings and also double check how your existing supply is regulated.  Not being able to see your set up in person, I'm hesitant to give you a clear indication either way.  I'd recommend you follow up with some advice from a gas fitter.

G'day Jay,

Thats a great question and we're not aware of anyone who's done it! In theory you could but I dare say it would be less efficient and take a longer time than a stove.  You best bet would be on the open grill side.  If you try it out, let us know how you go!

G'day Nicky,

The Voyager Portable BBQ is not compatible with Coleman propane cylinders. The unit is supplied with a gas hose that has a POL fitting so it will fit your 9kg style gas bottles. 

G'day Sue,

You should be able to cook a meatloaf inside the Voyager Portable BBQ, however please note you'll be limited by the hood depth of 14cm, so you will need a shallow pot to cook it in.

G'day Arun,

You'll be able to use the Voyager Portable BBQ with a 2kg gas cylinder, you'll just need to use a Gas Cylinder Adapter to connect the hose to the bottle.

G'day Mike,

The Voyager Portable BBQ is supplied with a hose that has a POL fitting on the gas bottle end. You'll be able to use this with a standard 4kg or 9kg gas bottle that has a POL fitting.

G'day Chris,

It's not a temperature control as such but more a valve control.  The dial controls the amount of gas being released and therefore, you can lower or increase the flame/heat output.  Instead of a numeric temp indicator, there are markings to show in which position the gas is increased and which its lowered.  Hope that helps :)

Hi Luke, you'd need a combination of adapters for this. I'll assume you are using a 9KG POL gas bottle (POL being the fitting for the gas bottle on the Voyager BBQ hose). 

If you firstly attach a dual outlet POL-POL adapter to your bottle (https://www.snowys.com.au/pol-cylinder-to-dual-pol-outlet) you'll be able to screw the Gasmate Voyager BBQ hose into one side. THen you'll need a POL-3/8 BSP adapter (https://www.snowys.com.au/gas-cylinder-adapter-pol-38-bsp-lh-straight) to go into the other side so you can attach your 2 burner classic stove. 

If your gas bottle has a 3/8 BSP fitting (the fitting for the gas bottle on your 2 burner classic stove) then you may need a combination of a double 3/8 BSP adapter (https://www.snowys.com.au/gas-cylinder-adapter-38-bsp-lh-to-double-38bsp-lh) and a 3/8 BSP -POL adapter (https://www.snowys.com.au/gas-cylinder-adapter-38bsp-lh-to-pol).

I do recommend that you take care when putting multiple adapters together as you are increasing the points in which leaks can occur. Always check for leaking gas with soapy water before lighting a flame and if in doubt, consult a plumber or gas expert.

G'day Paul,

At this point in time we're unable to get our hands on the 3/8" SAE to Bayonet hose you'll need to run the Voyager from your van. You should be able to pick one of these up from somewhere like BBQs Galore though.

G'day Jeff,

We've just been in touch with the team at Gasmate, and unfortunately, there is no conversion kit available for the Voyager BBQ to use it on Natural Gas at home.

G'day Rozina,

The burner is in the form of a long rectangular bar with flame release points along each length.  It is centred but not in the way a circular burner would be, instead the shape of it caters well for both grill plates.  The video (bottom right image) offers a good idea into what it looks like and how it operates.  Hopefully that'll help :)

Sure thing, Lyndal. The cooking area is half hotplate and half grill, with the total length being 46 cm, and the width at the widest point is a little over 33cm.

I hope this helps.