G'day Tim,

It wont work, sorry - the zipper orientations run in opposite directions, and they have the same zip half with the slider.

G'day Jodi,

No, theres not - Oztent are upgrading their packaging & product codes, but theres no change to the actual product.
I'm assuming you're talking about water when it rains?  It will just run off the awning in whichever direction the slope is - if your awning is connected higher than the tent like in the product image, the water will run down and off the back of the tent.

G'day Zach,

This wouldn't be the right fit for the Darche 270 Awning. The Awning has different-sized zips and lengths to connect to.

G'day Pete,

It won't unfortunately.  The orientation of the zip on the Foxwing walls is opposite to the Awning Connector, which means the only way you'd be able to connect it is with the wall 'upside down' exposing the waterproofing, etc which means it's likely to deteriorate alot quicker. 

G'day Matt,

The side awning is 190cm wide, the awning/sail track connector is 240-260cm wide depending on which size you go with.
Whilst the zips may connect, they won't line up size wise.
Hope that helps.

G'day Ted,

I'm assuming you are refering to the Oztent RV tent fly?  If thats the case, then I've just done alittle bit of a brian dump working out all the zip orientations, and it wont work.  The zipper on the fly and the zipper on the awning connector do not have the physical zip slidders on them, they only have the flat blank end that is designed to slide into the zipper on the phyical tent.

G'day David,

There is no zipper on the front edge of the Zip-In Tarp Extension (assuming this the additional awning you're referring to?), so No, you won't be able to attach this to your Caravan using the connector.

G'day Chris,

Theres not, I'm sorry.  The only accessories available or compatible with the SV-5 are the walls, fly, awning extension & groundsheet.
It may be possible for you to have something made up custom, usually your local canvas/awning specialist has the ability to make something up.
Sorry to not be of more help.

G'day David,

I've just jumped off the phone from Oztent.  They've confirm they use a size 8 YKK zip on the RV range.
Hope that helps.

G'day Craig,

It's 2.6m long - this is attached via zip and sail track, so not sure how compatible it will be with attachment to the Osprey.
It may need some modification to get it to work.

G'day Matt,

We've spoken to Oztent on this one before, and apparently, all the RV5 accessories work with the RV5 Plus, with the exception of the awning walls.

G'day Cam,

That's a great question!  In theory you could, however, every brand (and even different models within the same brand) will use different zips...its impossible to tell whether or not your awning wall would be compatible with the RV sail track connector.
Alot of people forget about the good ol' canvas and awning specialists, if you have one locally they'll probably be able to make a sail track zip connector that's perfect for you, or potentially modify this one if required.

G'day Shelia,

There's nothing off the shelf that will meet your needs unfortunately.
I'd probably recommend looking at getting something like a Slimline Side Awning and having it professionally mounted, or having a sail track installed on the side of your van, and having a custom canvas made up that will slide straight in.
Having a quick look at your location, Werribee Tarps would be the perfect place to contact for this.  Canvas and Awning specialists do customer jobs all the time, and its the sure fire way to get exactly what you want!

G'day Chris,

Yes, the RV5 Caravan & Sail Track Connector can be used with the RV5 Plus Tent.

G'day Johann,

The Oztent RV Caravan & Sail Track Connector is not compatible with the RX Tent.
As the RX is a stand-alone model and is seperate from the RV series, it has different zip configurations.
Unfortunately, there is no sail track connector available for the RX tents.

G'day Jim,

Great question! In theory, it seems like it will work however, I've had a long chat with Oztent and they have actually never tried this so are not sure if it will work or not.

G'day Robert,

Sorry it's taken a little while to get back to you on this one, it's not an overly straight forward question to be honest. Unfortunately this won't work for you based on the zipper locations for the various accessories. The awning walls you've got don't have zipper pulls, just the zip themselves. The caravan connector has a zipper pull on it (for a front wall attachment when used with the Oztent RV range), however the zipper pull is on the opposing side to the awning wall. Theoretically this could work if the caravan connector, or awning wall are attached upside down, but it's something we'd be comfortable recommending. The sail track on the RV5CC is 7mm. Hopefully this helps.

G'day Phil,

The Caravan connector can only be attached directly from the sail track on your 4wd awning to the zip on the Awning of the RV tent. There is no zip on the RV tent for the connector to attach to.

G'day Cilla,

The Rv Caravan connector is just the small piece that connects the awning from the RV tent directly to the sail track on your caravan. I'm not too sure what you're referring to in regard to eyelets for tent poles, as the eyelets are part of the tent awning itself. Maybe give us a buzz on 1300 914 007 if this doesn't make sense and we can chat through some options.

G'day Tim,

I've just double checked the zip tracker on the front of the RV tent awning and there is only one, so you'll only be able to attach the Caravan Connector, or the Front Wall, but not both. 

G'day Luke,

Thanks for getting in touch. Something that we didn't realise at the time we answered this question was that there were two zippers on the caravan connector itself. So to clarify, yes you can set up the caravan connector and front wall simultaneously as per the video Ben has recently filmed.

The caravan connector has about 30cm of fabric between the sail track connection and the zipper that connects to the awning, Phe. The side walls finish at this point too, so as long as you set the tent up so this is butt up against your van then you won't have many gaps, but you will have sealed the top gap from water ingress.

G'day Jackie,

You can leave the RV Caravan Connector attached but it will flap around if you go for a drive. The best option would be to detach the connector from your tent awning, slide the awning connector out of the sail track and then roll back and secure the tent awning.

G'day Bron,

The RV Caravan Connectors will connector to your van using the sail track so it shouldn't be a problem to use with your Jayco Heritage.

G'day Chris,

I've just called Oztent to check this for you because I didn't know. They've confirmed that you can use an Ozten RV Caravan Connector on your Oztent Eyre Tent.

G'day Steve,

Unfortunately, the awning of the RV5 is stitched on so it's unable to be removed. To connect an RV5 to a Foxwing, you will need to use the awning and then an additional Oztent Awning Connector available here. Or as you've already pointed out, use the Tagalong which while unfortunately a little smaller, is better designed for your idea.

We've gotta come back and potentially correct ourselves here.

We are yet to physically try this but I think the direction of the zippers won't allow this to happen. The Tagalong is made to zip directly to the awning of an RV tent with the same zipper that the Caravan Connector joins. Flipping the Caravan Connector around to attach it to the Tagalong Tent means that the zipper will be starting on the opposite side/end.

We are yet to test this and will do once logistics allow, but in the meantime, we'd love to hear from anyone else who has tried to connect their Oztant Tagalong Tent to a 4WD awning with the Caravan Connector.