Menu
Search Search
(0)

Primus

High Volume Camp Shower

$64.95
$54.90

Delivery estimate to:

Pickup from our store

92 Richmond Rd, Keswick SA Mon - Fri: 9am - 5.30pm
Saturday: 9am - 5pm
Sunday: 12pm - 5pm
17 Doherty St, Brendale QLD Mon - Wed: 9am - 5.30pm
Thursday: 9am - 7.30pm
Friday: 9am - 5.30pm
Saturday: 9am - 5pm
Sunday: 9.30am - 2.30pm

The Primus High Volume 12V DC Camp Shower is ideal for camping and outdoor use.

It operates using a suitable 12V DC connection and water source.

3 adjustable hot water flow settings give you the choice of shower, spray, and massage.

  • Comes in a compact and protective storage container
  • Around twice the output of most 12V camp showers
  • Water flow shut off switch on shower head
Snowys Code:
130161
Supplier Code:
PRI0012
Packed Dimensions:
33L x 28W x 8.5H cm
Shower Hose Length:
2 Metres
Cable Length:
5 Metres
Material:
Plastic | Silicone
Pump:
Electric
Input Power:
12V DC | 2.5A
Flow Rate:
6 L/min
Weight:
1.44 Kg
Warranty:
1 Year

Be the first to review this product

Shower handle switch1 answer

Does the switch on the shower handle turn off the pump or just the flow?

- 3081(4 weeks ago)

G'day Gabi,

The switch on the shower head of the Primus High Volume Camp Shower only stops the water flow. The switch for the pump is separate.

- Snowys(4 weeks ago)

I cannot find the fittings to connect to the pump1 answer

I bought this specifically because the pump had a screw fitting that i assumed i would be able to connect to a pipe/valve or pipe fitting of some sort. My plan is to have a header tank that it connects to and pumps from. I searched high and low in bunnings with no success. Even the assistant said they had not seen that type of thread before.

- Brisbane(3 months ago)

G'day Simon,

You've got an interesting predicament that we've been asked about a few times. I'm not sure what the name of the thread is, however, in your circumstance, I'd recommend visiting a specialist plumbing centre who often carry a much bigger range of fittings than general hardware retailers. This has been the solution for others in the past and they'll hopefully be able to offer you greater assistance in achieving what you would like to do.

- Snowys(3 months ago)

12v whilst car is running or off?1 answer

Can you run this while your car is running so you don't drain the battery? Or does the car have to be off?? Is there a battery pack you can run it from instead?

- MACKAY, QLD(1 year ago)

G’day Kathleen, the Primus High Volume Camp Shower can be used while your car is running but it will also work when your car is on (with the engine off). You won't run into an issues with draining your car battery with this shower system, as that would only happen if you left it on for several hours. The Primus High Volume Camp Shower can definitely be used with a portable battery pack, as long as it has a suitable 12V DC connection.

- Snowys(1 year ago)

How do I get warm water from it1 answer

- MORWELL, VIC(1 year ago)

G’day Daniel, the Primus High Volume Camp Shower is designed to distribute water. To use it you submerge one end into a bucket or water container and then connect the other end to a 12V power source - so if you want to have a warm or hot shower you just need to heat the water up beforehand.

- Snowys(1 year ago)

What container is it meant to attach to1 answer

Is there a certain brand of container that the threaded part of the pump is meant to go on?

- ANNA BAY, NSW(1 year ago)

Hi Darren, The high volume camp shower is designed to be submerged into a bucket or water container. There is a coleman collapsible water carrier that can be attached to the pump however it isn't currently available on our website. Hope that helps.

- Snowys(1 year ago)

What is the thread size on the base of the shower head?3 answers

Hi, I would like to know what is the thread size of the base of the hand held rose/head. Is it 1/2" BSP for example?

- Melbourne(1 year ago)
G'day Lachlan - I've sent you an email with a few photos of the fitting as a bit more of an illustration. That said, the internal diameter on the shower head fitting is 1/2". Cheers, Paul
- Snowys(1 year ago)

I dont think it is BSP as I cant get it to fit anything and want to put it onto a tank but i'm stumped as to how to do it...it fits a Frantelle 15L bottle but that is it,,

- Melville? Perth(12 months ago)

G'day Lachlan,

I've pulled out the Primus High Volume Camp Shower to check, and it definitely has a 1/2" fitting. If you are having trouble connecting it to your tank it may be because it has a different fitting. 

I think your best bet would be to call up your local hardware store as our knowledge of plumbing fittings is a little limited I'm afraid.

- Snowys(12 months ago)

Controlling Flow1 answer

Hi, Does the handle allow the user to adjust the flow rate? I noticed that the flow type can be adjusted (ie different types of sparys) but can the water flow be controlled in and not just on and off?

- Melbourne(1 year ago)
G'day Lachlan - You can't change the flow on this one, unfortunately. It does have a range of spray settings through, which will alter the showering 'experience' so to speak. Hope that helps. Cheers, Paul
- Snowys(1 year ago)

Can you get a separate shower head as an accessory?1 answer

If you can how much is it please?

- Cherrybrook(1 year ago)
G'day Rhonda - I've spoken to Primus. They don't sell the shower head as a spare part or accessory per se, but they do have a number of spares floating around the place. If you want to get your hands on one we can order it in. Give us a call on 1300 914 007 if you would like to. Cheers, Paul
- Snowys(1 year ago)

Replacement 1 answer

Hi there, could this be used With the aqua cube?

- , (1 year ago)
Sorry Tammy, this product is not compatible with the Aqua Cube. If you're needing a replacement pump and hose for your Aqua Cube, give us a call and we can arrange to order them in for you.
- Snowys(1 year ago)

can the pump be submerged in a bucket of water?1 answer

can the pump be submerged in a bucket of water? or does it have to be connected to a fixture?

- drouin(2 years ago)
Hi Abbey, to operate, the pump needs to be placed in a vessel of water, but there is no need to attach it to anything.
- Snowys(2 years ago)