G'day David,

The plug wired into the back of the light is called a Deutsche plug, they are fairly common in the automotive industry, so you should be able to pick up a plug and lead to wire into your setup from most automotive stores. 

G'day Rory,

You can connect the 10W Flood Light Kit to a 12V cigarette plug using the Cig/Merit LED Extension Lead.

G'day Mick,

The Hard Korr 10W LED Flood Light is commonly used in existing lighting systems with a couple of considerations.
First one is that it is only compatible with the White lighting systems.  If you have the Orange/White or the 3 Colour system it won't work.
Secondly, you'll likely need to use with a splitter.  If your original kit didnt have this nifty piece of gear, the LED Extension Cable Kit will have what you need.

G'day Mick,

It will certainly illuminate your cooking area well! It looks as though it doesn't have the dimmer function. 

G'day Ben,

The 10W LED Flood Light just has a fixed beam but you can tilt it up/down using the mount bracket. You might be able to add a movement sensor, but it's not really something it is designed to do sorry.

G'day Ben,

Yes, the 10W LED Flood Light comes with a Deutsche Lead, but it also comes with a Deutsche to DC adapter that will connect to the Korr style extension leads which come in their multi-bar camp kits.

G'day Geoff,

The light itself doesn't have a built-in switch. It is supplied with a Deutsche lead that you can connect to other wiring in your vehicle and set up a dash switch, or alternately you can use the supplied DC adapter to connect it to a Korr Cig/Merit LED Extension Lead and on/off 12V Switch.

G'day Geoff,

The 10W LED Flood Light has a 12v Cig plug on the end of the cable, so you could run it from your deep cycle battery if you have the correct attachments.

G'day Kevin,

I've just double-checked the fittings on the 10W LED Flood Light and they have a DC connector that will connect directly to the Cig/Merit LED Extension lead so you can plug it into your 12V cig-plug.