what is the 240v power start up for a mt_v45f engel fridge

I am close to buying the Engel MT-V45FC (40L) instead of the 57L model as the 40L best meets my needs. However, I need to be certain about the process for generating cold air for the fridge section (which is connected to the freezer section) as there is no obvious cooling vanes around the walls of the fridge compartment. There seems to be small plates (2) at the top of both fridge side walls – almost on the rim – is cool air pushed (fan?) downwards through that? Without separate temp settings, my concern is that if I set the freezer at (say) -13, will my fridge section be so cold that the tomatoes & lettuce turn into ice blocks? The inside of the unit lid has a raised section which seems to sit on the top of the fridge/freezer divider, thus preventing cold air transfer? However, if I were to change the fridge/freezer combination and thus alter the location of the divider, the ridge on the lid would no longer sit on the divider top thus creating a gap and breaking what seems to be a seal between the divider and the inside lid? Can you comment on these points please?

Can you plug an Anderson plug directly into the MT- V45F i.e. using a double ended Anderson plug power cord?

I have 2 eclipse units. I can leave 240v & 12v plugged in continuously & the fridges alternate between power sources automatically. Does the MTV do the same?

May I please know when you fully open the lid 90 degrees up, what is the total height? Just seeing if it will be a good fit in my tool box Thanks