Heads up! We’re currently experiencing delivery delays across the country – especially NSW & VIC.
Details & Specs
Okay, so you’ve got yourself some snazzy auxiliary lights for your vehicle and now it’s time to get them all rigged up. Hard Korr’s Piggyback Adaptors are going to make connecting their Wiring Harness a whole lot easier.
If the factory headlights on your vehicle use a standard high beam (H-series) plug, then you’re going to need an adaptor with your separately available wiring harness to get your lights up and running. Many newer vehicles use custom plugs because their headlights use LED or HID technology, or if the light bulbs are sealed inside a dust cap, and these also need an adaptor. Choose the one that suits your make and model of vehicle, connect straight up to the factory headlight plug, then plug the white T-connector on the back of the adaptor plug straight into the connector on Hard Korr’s Wiring Harness and you’ll be up and running.
Forget having to pull out the special wire snips and solder, just keep it simple with Hard Korr’s Piggyback Adaptors.
Allows auxiliary lights to be installed using a standard wiring harness
Compatible with factory standard H-series plug
No cutting or soldering needed
Adaptors are available for a wide range of vehicles
12L x 3.5W x 25H cm
Plastic | Cable
Vehicle | 4WD | Touring
Staff tip:The most common H-series plugs – H3 or H4 – are included with Hard Korr’s Wiring Harness so check before purchasing an additional adaptor.
Staff tip:Check with your vehicle manufacturer to ensure you are selecting the right option.