G'day Nate,

Do you mean to use on the Canvas door flaps for setting them up as an awning?
If thats correct, the swag height at the rop of the door way is around 100cm, plus the stretcher height of 42cm, means you'll need an awning pole that covers around 142cm tall.
These poles extended 90-230cm, so you wont have any issues.

G'day Jake,

The internal diameter of the bottom pole is 29mm.
Hope that helps!

G'day Andy,

We've tried these out in a Darche 900 swag bag for you, and they're a touch too long / create pressure on the canvas.
Your best bet if you are wanting awning poles for your swag, is to grab the Swag Awning Pole Set - they 75cm and designed to fit in any single swag bag.

G'day Steven,

Yes, you can use the Telescopic Alloy Poles with your High-View Annex.

G'day Daniel,

We dont have any of the Oxley Tent series left in stock to check in person, but I can confirm the spigot diameter on the Darche Telescopic Alloy Pole is 6mm.
Hope that helps!

G'day Boyd,

You could probably use a Darche Telescopic Alloy Pole to replace one of tour Ride Ryder awning poles, you'd just have to find a way to secure it to the awning, at these poles have a spigot on the top which is designed to slot through an eyelet.

G'day Scott,

Yes, you can use the Telescopic Alloy Poles with your Darche 270 awning if you're looking to replace some of the poles.

G'day Nick,

Yep, you won't have a problem at all with the Darche Telescopic Alloy Pole spigot fitting in with the RV5 eyelets.

G'day Rob,

I've just had a look at there isn't any visible flex in the Telescopic Alloy Pole when retracted. When they fully extended there is a very small degree of flex.