If you’re looking for a quick way to secure a tarp or shelter when a guy rope or trace spring isn’t needed, then the Hex Peg Flat Top Drillable Tent Pegs are the simple solution.
The Hex Peg Flat Top Pegs can be inserted and removed in just seconds using an electric or cordless drill or impact driver thanks to the unique design. Made from high-quality steel, this peg is perfect to use through D or O rings at the base of a tarp, tent or annexe as long as the ring is 10mm in diameter. This is especially handy for tarps and groundsheets as the flat design won’t be as much of a tripping hazard.
Save on time and energy when pitching and packing up with some help from the Flat Top Drillable Tent Pegs from Hex Pegs.
Can be inserted and removed in seconds
Compatible with all electric and cordless drills and impact drivers
Designed to be used in any application where the hook is not required to attach a guy rope, or trace spring
Can be used through O or D rings that are 10mm in diameter
28.5L cm | Shaft Diameter 1 cm | Hex Head 1.5cm
Threaded Steel Body | Stainless Steel Washer | Rubber Grommet
Drill trace spring directly to ground? 1 answer
Hi I note that the hook top hex pegs do not work well with trace spring guy ropes....Do you think I could use these flat top ones to drill the trace spring directly to the ground?
Woody - Golden Square(1 year ago)
Yes you could drill the spring directly into the ground using the flat top hex pegs. You wouldn't want to drill them all the way down as the spring needs to be on a bit of an angle, but this set up should work ok.