If your shelter is sagging a little and lacking in stability, then the Big Foot C-Clip Steel Spreader Support Pole from Supa Peg may be what your setup needs.
Made from hi-tensile steel, this pole is also galvanised which adds an extra layer of protection so that it stands up to use out in the elements. The base has a nylon cap with unique drainage holes which adds a 32mm footprint for extra support. It also features a quality thumb screw and T-Nut for secure adjustment.
The pole top has a C-clip that fits round spreader poles and can be used to brace a windbreak or side wall or add central support to a spanning spreader on your custom shelter.
Galvanised hi-tensile steel
Nylon cap with unique drainage holes for stability
High-quality thumb screen and t-nut for adjustment
C-Clip on top end suitable for round poles
275L x 2.5W x 2.5H cm
151L x 2.5W x 2.5H cm
High Tensile 0.9mm Galvanised Steel | 19/22.2mm Diameter | Gold Zinc T−Nut | Nylon Cap & C−Clip
Pole foot1 answer
Does the foot on this pole come out easily enough to allow me to cut the pole down to size and refit the foot? Alt do you stock shorter ones? Fully extended 1200. Sorry - I’ve asked this question twice as I typed my email address for response incorrectly ðŸ¤¦ðŸ»â™€ï¸
Sue - Greigs Flat, NSW(1 year ago)
Yes, you can trim the pole down, but you will need to cut both the internal and external pole lengths so it can still collapse inside itself.
When this pole is collapsed, is 151cm tall - so if you are needing a pole shorter than that, I would recommend looking at swag awning poles instead, and getting a c clip insert to replace the spigot if that's the kind of end you need.
Lauren - Snowys(1 year ago)
Diameter of C clip1 answer
Hello, I’m just after the diameter of the c clip on this pole please. Thanks.
Helen - Warragul(3 years ago)
I'm not 100% sure whether you're asking for the diameter of the C-clip base that slots into the pole, or the size of the U-shaped clip? The C-clips on this pole fit a 19mm diameter steel pole, with the C-clip itself flexible, and designed to fit a variety of pole diameters from around 19mm-24mm