Bent spigots are suited for camper trailers and caravans where there is a locator that will accommodate the bent tip to create a roof rail or ridge pole to create an awning or extended shelter.
These spigots are available in sizes to suit standard round tubular camping poles and feature UV treated plastic and zinc plated steel for strength and longevity, even in harsh outback or salty environments.
Zinc coated for corrosion protection
90-degree bend in spigot
Suits standard tent pole diameters
Made in Australia
7L x 3W x 1.9D cm
7L x 3W x 1.9D cm
Gold Zinc Plated High Tensile Steel | UV Treated Plastic
What size would I need to fit into Oztent telescopic poles. Cheers
Den - Perth, WA(1 year ago)
If you are using the 2 piece telescopic poles, you'd be looking at the 19mm spigots. The Oztent awning pole spigots and depressed in, so you will need to cut the ends the pole off before you can replace the spigot. If you have the 3 piece telescopic poles, they arent compatible with these Supapeg spigots.
Lauren - Snowys(1 year ago)
Spreader Poles1 answer
Hi. Do these spigots work with spreader poles such as the https://www.snowys.com.au/alloy-telescopic-spreader-pole ? I’m looking to use a bent spigot (this or f-shape) to better secure a tarp setup. Speaking of f-shape do you have any bent spigots that bend at 30 or 45 degrees, rather than 90?
Aaron - Clifton Hill(5 years ago)
At this point in time, we only have 90-degree spigots. Unfortunately, you can't fit them into the Oztent Alloy Telescopic Poles as the pole diameter is slightly different at either end so will only work with the fitting provided. You might find that you can't fit them to the spreader style poles due to the pole diameters being slightly different end to end. The Spigots are generally ok for the awning style poles.