3 Burner Eventemp™ Stove

G'day Andrew,

You can find the Carry Case for the Coleman Eventemp Stove here.

G'day Joseph,

The Coleman 3 Burner Eventemp Stove should be fine on top of a Polyethylene table. I've just spent the weekend away with a mate who used his on one of these tables and it was fine.

G'day Jason,

Yes, you can adjust the temperature on the Coleman 3 Burner Everntemp Stove. They are able to be adjusted down to a low enough temperature to simmer.

G'day Glen,

The Eventemp stoves come with a 12-month warranty so if you'd like us to look into this for you send us an email with some pics of the hotplate to service@snowys.com.au and we'll get our warranties team to look into it for you. As far as an alternative goes, I've just tried the Campfire 3 Burner Hotplate on the Eventemp stove and it does fit ok, it's just a bit shallower than the included hotplate.

G'day GR,

The Coleman 3 Burner Eventemp Stove will just fit on the middle table on the Oztrail Camp Kitchen with Double Pantry. It will be safest with the sides up as windshields but you should also be able to use it with the sides down and the drip tray fit for the plate. 

G'day Todd,

Sorry mate, you'll need to purchase the carry bag separately as these don't come supplied with one. 

G'day Alex,

The Coleman 3 Burner Eventemp Stove is supplied with a regulator and a hose, if you're running the stove from a 2kg Gas Cylinder then you'll just need to connect the regulator to the stove, then attach the hose to the regulator, and the hose to the bottle. You can purchase the propane canisters if you would like that flexibility too, they're often popular for picnics, or overnight trips.

G'day Matt,

Sorry mate, these stoves can only be used with supplied regulator. It's a Coleman specific fitting and no one else makes anything quite like it. You can grab this hose and that will allow you to run the stove from the little disposable Coleman canisters, which is handy if you were looking for a way to avoid dragging a big gas bottle away with you, but this obviously comes with its own limitations then. 

G'day Alistair, 

I've just confirmed this with the supplier, and it looks like the Eventemp Stove is sitting on top of a stove stand in those images, so it doesn't come with legs. Hope this helps Alistair. 

G'day Irene,

I've just double checked the owners manual on the Coleman 3 Burner Eventemp Stove and the hose that comes with it is 150cm long. 

G'day Jess,

Unfortunately, we're not able to get our hands on the stand that's shown in the photos of the Coleman 3 Burner Eventemp Stove. The best stove stand I can suggest is the Zempire Stove Stand, it should do the job nicely for you. 

G'day Barb,

The Coleman 3 Burner Eventemp Stove comes with a griddle/hot plate and grease cup as standard. So you won't need to buy one separately. 

G'day Rob,

You sure can, we've got a few on our shop floor at the moment but we don't have them up online. You can either pop into our store or give us a buzz on 1300 914 007 and our customer service team will be able to help you out with getting a hotplate for your Coleman 3 Burner Eventemp Stove. 

G'day Ed,

To connect a 4.5Kg or any LPG bottle to the stove you will need the gas hose that came with your stove for 3/8" BSP bottles, or you can purchase one separately to suit a POL bottle - these hoses do not have a regulator.

The EvenTemp stove comes with a regulator which is the funny looking silver elbow that screws into the side. This regulator facilitates the connection of any gas source connected to the EvenTemp stove. This means that the 4.5Kg LPG bottle with either a 3/8" BSP or POL fitting will connect to the gas hose followed by the included regulator which then screws into the side of the stove.

I hope that makes sense.