G'day Shane,

The Zempire air poles are quite big and these velcro strips wouldn't be big enough to go around the whole pole, you may need something extra to help these attach to Zempire Air Poles.

G'day Cindy,

Yep, the 10m extension chord can cover up to 4m of strip lighting, and one dimmer switch will cover around 2.5-3m of lighting.
Based on what you've described you shouldnt have any issues!

G'day Bowen,

No, is the short answer.
USB power sources are 5v, and these lights require 12v power.
Whilst there are some USB to 12v cig adapters available, the absolute biggest 12v output I can find in these is 8watts, which only gives you 0.6 amps.
These lights require 1.4 amps to run, so its not possible to use an adapter and power these lights from a USB power source.

G'day Reece,

The Hard Korr 240-12v transformer will do the trick!

G'day Benjamin,

Yes, you can connect the Ezy-Fit LED Strips to the Korr Orange/White kits, however, they do draw 1.44A so if you use them with the 240 Transformer you can only plug in a maximum of 3 amps. The Bar kits draw 0.6A per bar, so you'll only be able to pair it with the 2 bar kit.

G'day Jason,

This particular LED strip only has velcro and carabiner clips to attach it to your tent or canopy. Unfortunately, Korr doesn't make a light that slips into a sail track.

**2021 UPDATE**
The 1.2m 3 Colour Ezy-Fit Flexible LED Strip Light now comes with a built-in sail track edge for easy awning installation! 

G'day Vanessa, 

Unfortunately, we are out of stock of these at the moment so I can't go and have a good look at them. From what I can see in the information Korr provide, they attach with velcro straps, not a velcro strip as such. I assume these would be quite easy to attach to awning poles, but it would perhaps be best to check with Korr before making a decision.